Automotive Accessories

Tremec’s One-Off Manual C8 Corvette Works, but the Gearbox Alone Costs $75,000

A track test of Tremec’s manual-transaxle C8 development car shows the conversion fits the stock tunnel, while a $75,000 gearbox price and remote shifter define the trade-offs.

Sofia MarchettiNovember 17, 20265 min read4 views
A mid-engine sports-car development mule on a private track, shown with a cutaway detail of a manual transaxle and floor-mounted shifter.

Tremec has built a one-off manual-transaxle version of the mid-engine Chevrolet Corvette C8 and let a reviewer and several potential customers sample it at Motorsports Gateway, a new private track outside Howell, Michigan. The car is a Peitz Performance race build, not a showroom model, and it remains the only example of its kind. Its existence matters because the C8 was designed exclusively for a dual-clutch automatic, a decision that closed off the manual option.

The C8 was not only Chevrolet’s first mid-engine Corvette; it was also the first Corvette offered solely with a dual-clutch automatic. The account says developing two transaxles, one manual and one automatic, for a mid-engine layout would have been costly, and that GM chose the automatic. Tremec, whose six-speed manual has been used in GM performance models including the Blackwing cars and the Camaro, therefore took on the manual conversion as a development exercise.

The test car is far from a showroom piece. It has no meaningful interior finish, a fully caged cabin and a harness. The shifter protrudes from the space normally occupied by the storage cubby and automatic gear selector. Its seating position has almost no adjustment, which made heel-and-toe downshifts awkward for a 5-foot-7-inch reviewer who could not reach the floor to brace in corners. Those limitations kept the track test conservative, especially on a green track on a November afternoon in Michigan.

Packaging fits, but the shift feel changes

Peitz Performance did not have to make major structural changes beyond cutting the tunnel to install clutch-pedal hardware. The manual gearbox occupies the same space as the stock dual-clutch unit, with no special mating hardware, and the pedal box has enough room for a clutch. The layout is even described as roomier than a previous-generation Camaro’s.

The driving experience is altered by the transaxle layout. Because the shifter is mounted remotely and linked by cables running aft to the gearbox, it feels less precise and less mechanically crisp than the front-engine TR-6060 six-speed. It is also less notchy, which may smooth the action for some drivers while depriving others of the more mechanical feel. Moving the engine forward or the shifter rearward would change that, but neither is a simple fix in the C8’s mid-engine package.

A $75,000 gearbox

The largest obstacle is cost. Tremec says the gearbox alone costs about $75,000, and combining it with a Corvette puts the total near a showroom-spec Z06. The company expects the price to fall as volume rises. Tremec also says automakers are interested in a high-torque manual transaxle, not necessarily or exclusively General Motors, although no customers were named. The gearbox was engineered to fit the C8, but Tremec did not identify a production customer.

For now, the manual C8 remains an engineering demonstration rather than a showroom option. It shows that the packaging can be solved and that a third pedal can fit the mid-engine Corvette, but it also shows why a production manual C8 remains uncertain: the business case is difficult, and the cost of low-volume hardware is high.