Chemicals

ArcelorMittal Gent carbon-capture pilot exceeds 90% CO2 capture from blast furnace gas

Phase 1 of the four-company trial used MHI’s Advanced KM CDR Process; the next phase is set to test hot strip mill reheating furnace gases.

Nadia SorensenNovember 2, 20265 min read0 views
A conceptual illustration shows a blast furnace and a carbon-capture unit linked by pipes at an integrated steelworks, with steel slabs in the foreground.

A carbon-capture pilot at ArcelorMittal’s integrated steelworks in Gent, Belgium, has completed its first phase after capturing carbon dioxide from blast furnace gas at rates exceeding 90% at pilot scale. The trial applied Mitsubishi Heavy Industries’ Advanced KM CDR Process and involved ArcelorMittal, MHI, BHP and Mitsubishi Development. It accumulated more than 4,500 hours of operation and produced operational and engineering data for assessing a future full-scale installation at the Gent blast furnace.

Assessments based on the trial results indicate that full-scale application to the pre-combustion blast furnace off-gas could reduce CO2 intensity at the Gent site by up to 24%. The partners say that applying the technology across multiple emission points in the steelmaking plant could support progress toward near-zero emissions intensity. Those figures are projections tied to the trial data, not demonstrated full-scale results.

The phase 1 test focused on a proportion of the blast furnace off-gas. The gas stream contains dust, sulfur-containing compounds and other contaminants, making it a challenging environment for capture equipment. MHI said the campaign demonstrated that its process could operate under those conditions and generate data for commercial-scale design. Tatsuto Nagayasu, senior vice president and head of CCUS at MHI, described the operating hours and capture rate as an important milestone for applying the technology in the steel industry.

Blast furnace off-gas contains significant concentrations of both CO2 and carbon monoxide. In this phase, only CO2 was captured. The remaining carbon content, in the form of CO, can be used for power and heat generation elsewhere at the integrated site, with CO2 released when that gas is combusted. That boundary matters when evaluating the trial’s emissions impact: the 90% capture rate applies to the CO2 separated from the treated portion of blast furnace gas, while the CO-rich tail gas can remain part of the site’s energy system.

The next phase will broaden the trial to multiple emission points. It will test capture on gases from the hot strip mill reheating furnace, a gas-fired unit that heats thick steel slabs to the temperature required for rolling into thin sheets. The reheating furnace uses a blend of by-product gases from steelmaking—coke oven gas, blast furnace off-gas and basic oxygen furnace gas—together with natural gas, creating a post-combustion capture point. Phase 2 will assess MHI’s technology under a different and more dynamic flue-gas profile and provide data on integrating capture across several processes. Combined application across the plant could support progress toward near-zero emissions intensity steelmaking for the blast furnace, and the results will inform updated engineering and deployment studies.

ArcelorMittal is facilitating the Gent trial. MHI is supplying its proprietary Advanced KM CDR Process and leading carbon-capture process engineering and technical evaluation. BHP and Mitsubishi Development, key suppliers of high-quality steelmaking raw materials to ArcelorMittal’s European operations, are providing funding.

Frederik Van De Velde, CEO of ArcelorMittal Belgium, said the partners set out to understand how carbon capture can be incorporated into existing steel plants and that the first stage had produced important data. He called scaling up the needed technologies the vital next step and said he looked forward to the first results from capture at the hot strip mill reheating furnace.

Dr. Ben Ellis, vice president of marketing sustainability at BHP, said the results were promising and demonstrated the abatement potential of the blast furnace and integrated steelmaking route. He noted that around 70% of global steel production currently comes from blast furnace steelmaking and that the route is expected to remain important for decades, making emissions reduction from the blast furnace critical while alternate pathways are developed.

Tadashi Mizuno, managing director and CEO of Mitsubishi Development, said the positive phase 1 results strengthened confidence that carbon capture applied to blast furnace gas could provide a viable emissions-reduction pathway for the steel sector. He added that energy-efficiency improvements and high-quality raw materials will continue to matter in the near to medium term, while technologies such as CCUS could contribute significantly to longer-term decarbonization.